
Heavy-Duty W-Beam Guardrail
Also known as: road crash barriers, crash barriers on roads, crash rails
Heavy-duty W-beam for motorway median under truck traffic. Thicker section options, hot-dip galvanised, with sigma or H-section posts for higher stiffness.
- Choose this when
- Motorway median sections carrying heavy truck traffic over a long design life.
- Choose another when
- Low-volume roads, where the heavier gauge is paid for and never used.
- Profile
- Two-wave W-beam, heavy gauge
- Rail size (L x W x H)
- 4320 x 310 x 85 mm (4000 mm effective)
- SampleSample available on request, freight at cost
- PaymentT/T, L/C at sight — terms confirmed on the quotation
- ShippingFOB / CIF from Qingdao or Tianjin
- Lead time5–20 days after drawing approval
Where it is used
Motorway median under truck traffic.
Specification parameters
Beam dimensions
| Profile | Two-wave W-beam, heavy gauge |
|---|---|
| Rail size (L x W x H) | 4320 x 310 x 85 mm (4000 mm effective) |
| Thickness | 4.0 / 4.5 mm |
| Mass per rail | approx. 65.6 kg (4.0 mm) / 73.7 kg (4.5 mm, calculated) |
| Splice | 8 x M16 bolts per joint |
Material & coating
| Steel grade | Q355B (S355JR), 345 MPa minimum yield |
|---|---|
| Finish | Hot-dip galvanised after forming |
| Zinc coating | 600-1100 g/m2 |
Supply
| Matching post | Sigma 100 x 55 x 4 mm or H 150 x 100 x 4.3 x 5.5 mm |
|---|---|
| Post spacing | 2 m typical |
| Typical use | Motorway median under truck traffic |