Warning Post
Flexible delineator posts, bollards and hazard markers for work zones and traffic islands.

Flexible Warning Post
Flexible warning post for work zones, verges and car parks. Polyurethane or EVA body with reflective band, ground spike or bolt-down base.
Steel Traffic Bollard
Steel traffic bollard for pedestrian zones, car parks and toll islands. Coated steel tube with reflective bands, bolted to a base plate or set in concrete.
Guide Post
Guide post for road-edge guidance: white post with a black band and reflectors facing traffic, driven into the verge or set in concrete.Specification parameters
1. Product Range
| Surface-mount flexible warning post | Polymer post on a bolt-down base; can be knocked flat by a vehicle and springs back upright |
|---|---|
| Height variants | 450 / 750 / 1000 mm; 750 mm is the common size |
| Ground-fixed flexible delineator post | Post designed to deflect on impact and return to vertical (EN 12899-3 type D3) |
| Structure-mounted delineator post | Post fixed to bridges, barriers or guardrails (EN 12899-3 type D4) |
2. Dimensions
| Height | 750 mm (450 / 1000 mm options) |
|---|---|
| Post diameter | 80 mm |
| Base diameter | 200 mm |
| Fixing points | 3 anchor holes in the base plate, for asphalt or concrete |
| Unit weight (750 mm) | Approx. 1.3 kg |
3. Material & Colour
| Body material | TPU or PU; PVC and EVA formulations also used |
|---|---|
| Additives | UV stabilizers and cold-resistant additives in the body compound |
| Colour | Orange, red, yellow; white is required for road-edge delineator posts under some national rules |
4. Retroreflective Bands
| Sheeting | High-intensity micro-prismatic retroreflective bands |
|---|---|
| Band count | 2 – 3 bands on 750 mm posts |
| MUTCD tubular marker < 1067 mm (42 in) | Two 76 mm (3 in) white bands, top band max. 51 mm (2 in) from the top, max. 152 mm (6 in) between bands |
| MUTCD tubular marker ≥ 1067 mm (42 in) | Four alternating orange and white stripes, 102 – 152 mm (4 – 6 in) wide, top stripe orange |
| EN 12899-3 retroreflector types | R1 sheeting (min. class RA2 to EN 12899-1); R2 microprismatic; R3 glass bead |
| Curved surface | Sign sheeting tested flat may be applied where the post radius is 40 mm or more (Finnish rule under EN 12899-3) |
5. Performance Classes & Test Basis
| EN 12899-3 post types | D1 not re-usable after impact test; D2 re-mountable; D3 deflects and returns to vertical; D4 fixed to structures |
|---|---|
| EN 12899-3 deflection classes | WL0 not defined; WL1 max. 15 % of height above ground; WL2 max. 5 % |
| Permanent deflection | Not more than 5 % of height above ground after the wind-load test (D1 – D3) |
| Retroreflector impact classes | DH0, DH1, DH2 |
| US DOT impact test (typical) | 10 impacts by a passenger car at 88 km/h (55 mph); post self-erects within 10° of vertical (5° in some states) and retains 50 – 60 % of its reflective sheeting |
| Test temperatures (US) | Impacts split between approx. 0 °C (32 °F) and 29 °C (85 °F) |
6. Size Rules in Standards
| MUTCD tubular marker | Min. 457 mm (18 in) high and 51 mm (2 in) wide facing traffic; min. 711 mm (28 in) on freeways and high-speed roads |
|---|---|
| MUTCD material rule | Can be struck without damaging the impacting vehicle; channelizing devices shall be crashworthy |
| Finnish rule under EN 12899-3 | Post width facing traffic 80 – 150 mm; black reflector field approx. 250 – 300 mm high |
7. Standards
| Europe | EN 12899-3 (delineator posts and retroreflectors); EN 12899-1 (retroreflection classes) |
|---|---|
| USA | MUTCD Section 6F.65 (tubular markers); ASTM D4956 (sheeting); NTPEP flexible delineator evaluation used by state DOTs |