Roller Barrier
Rotating drum attenuators that redirect a vehicle on impact while absorbing energy.

Roller Barrier
Roller barrier with rotating EVA drums that redirect a vehicle on impact, for sharp curves. Galvanised steel posts and frame, replaceable drums.
Rotating Drum Guardrail
Rotating drum guardrail for tunnel portals and bridge ends. Energy absorbed by drum rotation rather than deformation, so a strike needs drum replacement only.
EVA Roller Barrier for Hairpin Roads
EVA roller barrier for mountain hairpins and steep descents. UV-stabilised drums, no rebound on impact, drums replaced individually after a strike.
Modular Roller Barrier Kit
Modular roller barrier kit for repairing or extending an existing run: posts, drums, axles and M20 bolts. One drum can be changed without removing the panel.Specification parameters
1. Product Range
| Single-roller system | One Ø350 × 500 mm roller per post |
|---|---|
| Paired-roller system | Two Ø350 × 245 – 250 mm rollers per post |
| Roller barrier for hairpin bends | Close post spacing for tight curves |
| Components & kits | Rollers, sleeves, posts, rails, end sockets and bolts supplied loose |
2. Roller
| Size | Ø350 × 500 mm (single); Ø350 × 245 / 250 mm (paired); customized |
|---|---|
| Material | EVA; polyurethane (PU); EVA / PU composite |
| Inner sleeve | PVC tube Ø160 × 500 × 6.5 mm |
| Turning ring | Ø182 × Ø145 mm |
| Color | Yellow, orange, red, blue, green |
| Reflective | Reflective film or strip on each roller |
| Operating temperature | −60 to +70 °C |
3. Frame Dimensions
| Post | Ø140 × 4.5 mm round tube; 2000 / 2100 / 2150 mm long |
|---|---|
| Post spacing | 650 / 666 / 700 / 1000 mm |
| Rail (cross beam) | 100 × 80 × 4.0 mm; 5000 / 5600 / 6000 / 7000 mm lengths; 1 to 5 rails |
| End socket | 1300 × 230 mm |
| Bolts | M18 / M20 (M20 × 60 / 120 / 140 mm) |
| Post cap | Rubber, 145 × 145 mm |
4. Material & Surface Treatment
| Steel grade | Q235 / Q345 (≈ S235 / S355) |
|---|---|
| Surface treatment | Hot-dip galvanizing on all steel parts |
| Roller properties (one supplier) | Density ≥ 125 kg/m³; tensile strength ≥ 1.15 MPa; elongation ≥ 320%; resilience ≥ 72% |
5. Performance Classes (as defined by the standard)
| Standards a project may specify | MASH (USA), EN 1317-2 (Europe), JTG B05-01-2013 (China); the class applies to the complete tested system |
|---|---|
| MASH test levels | TL-1 50 km/h, TL-2 70 km/h, TL-3 100 km/h (1100 kg car, 2270 kg pickup); TL-4 adds a 10 000 kg truck at 90 km/h |
| EN 1317-2 containment | N1, N2; H1 – H3; H4a, H4b; working width W1 (≤ 0.6 m) to W8 (≤ 3.5 m) |
| JTG B05-01-2013 | C 40, B 70, A 160, SB 280, SA 400, SS 520, HB 640, HA 760 kJ |
6. Applications
| Curves | Sharp bends, blind curves and hairpin roads |
|---|---|
| Slopes | Ramps, continuous downhill grades, steep slopes and high embankments |
| Accident-prone sections | Highway black spots |
| Medians | Median barrier against head-on collisions |