Get Free Quote

Guardrail Spacer

Spacers, blocks and brackets that set the rail offset from the post.

Specification parameters

1. Product Range

Closed Spacer BlockFormed steel block between round post and W-beam rail
BracketSteel bracket for round-post runs
U / C / H / Trapezoidal SpacerChannel-type spacers for channel and other open-section posts
Blockout (US)Steel, timber or approved plastic / composite blockouts for wide-flange post systems

2. Dimensions

Thickness range offered3 – 6 mm; customized
US blockout depth203 mm (8 in) on earlier strong-post systems; 305 mm (12 in) on 787 mm (31 in) rail-height systems
US deeper blockoutsUp to 406 mm (16 in) deep permitted to clear underground obstacles
US timber blockout152 × 203 mm (6 × 8 in) nominal

3. Material

SteelQ235B / Q345B
Grade EquivalentsQ235B ≈ ASTM A283M; Q345 ≈ ASTM A529M
AustraliaHA250 steel to AS/NZS 1594
Non-steel (US)Timber; approved plastic / composite

4. Surface Treatment

Surface TreatmentHot-dip galvanizing; PVC / powder coating in colors
JT/T 281-2007Spacers: ≥ 350 g/m² average zinc mass
GB/T 31439.1 project specificationsSpacers: ≥ 600 g/m² zinc
Heavy coating offered880 – 1220 g/m² (U spacer)
Galvanizing standardsEN ISO 1461; AS 4680

5. Fitting

Post to spacer (China)M16 × 170 (150) bolt
Spacer / bracket to rail (China)M16 × 42 (40) bolt
Channel postsC posts take C, U or special spacers
Timber blockout on steel post (US)Four 16d galvanized nails at the back corners, bent over the post flange
Narrow verges (China)Spacer projection may be varied within ±50 % of the listed value (JTG/T D81-2017)

6. Standards

ChinaJT/T 281-2007; GB/T 31439.1 / 31439.2
USAAASHTO M180; Task Force 13 hardware guide — W-beam and thrie-beam guardrail blockouts, timber blockouts
GalvanizingEN ISO 1461; AS 4680