End Terminal
Flared, turned-down and buried terminals that release the rail away from the vehicle.

Bullnose End Terminal
Bullnose end terminal for median openings and ramp gore points, R160 radius. Cast-in or driven anchor, hot-dip galvanised, supplied with the anchor set.
Fishtail End Terminal
Fishtail end terminal for W-beam run ends at ramp gores and median openings. 700 x 310 mm rail section, 2.75-4.0 mm, hot-dip galvanised.
Flared End Terminal
Flared end terminal that turns the rail down and away from traffic at a run end. 4.0 m length, W-beam gauge matched to the run, hot-dip galvanised.Specification parameters
1. Product Range
| Fishtail End Section | Flat spade-shaped end piece bolted to the last rail; W-beam and thrie-beam versions |
|---|---|
| Round End Section (Bullnose) | Curved end piece; R160 for roadside, R250 for median |
| Flared / Ground-Anchored End | Rail angled down to ground level and anchored in a concrete foundation at the end |
2. Dimensions
| Thickness options | 2.75 / 2.85 / 3.0 / 3.75 / 3.85 / 4.0 mm; customized |
|---|---|
| Matching | Profile and hole pattern matched to the guardrail in use; other sizes to drawing |
3. Material
| Steel Grade | Q235B / Q345 (Q355B) |
|---|---|
| Grade Equivalents | Q235B ≈ S235JR ≈ ASTM A283M; Q345 ≈ S355JR ≈ ASTM A529M |
4. Surface Treatment & Color
| Surface Treatment | Hot-dip galvanizing; powder / plastic spray coating |
|---|---|
| Zinc Coating | ≥ 550 g/m² (≥ 75 µm); 1100 g/m² option; customized |
| Color | Zinc-silver; blue, green, white, yellow and other colors when coated |
5. Layout & Installation
| Fishtail / round ends | Lapped and bolted to the last rail at run ends, openings, entrances and exits |
|---|---|
| China — upstream end | Flared round end, flared buried end or energy-absorbing end, with a transition to the standard run (JTG/T D81-2017) |
| China — downstream end | Round end in line with the standard run permitted; flared round end may be used on Class 2 roads |
| China — ends that cannot be flared | Expressways, Class 1 and Class 2 trunk roads: crash terminal or crash cushion; lower-class roads: ground-anchored end with object markings (JTG D81-2017, 6.2.13) |
| Germany (RAL-RG 620) | 12 m standard ramp-down at the start and end of the run |
| USA | Anchor required at every run end; exposed ends in the clear zone require a crash-tested terminal; a terminal buried in the backslope is preferred where available |
6. Standards
| Europe | CEN/TS 1317-7:2023 — performance and test methods for terminals; replaces ENV 1317-4:2001; restraint categories T80 – T110 (formerly P1 – P4) |
|---|---|
| USA | AASHTO M180 (end sections, terminal connectors, backup plates); MASH 2016 (crash testing of terminals) |
| China — design | JTG D81-2017 / JTG/T D81-2017 (end treatment); JTG B05-01 (crash-test evaluation of end designs not shown in the code) |