Guardrail Posts & Stanchions
C, U, sigma and H-section posts with base plates, spacers and anchor hardware.

C-Section Guardrail Post
C-section guardrail post in 150 x 75 x 4.5 mm, pre-punched for the blockout and rail. 1.5-2.2 m lengths, hot-dip galvanised, driven or base-plated.
U-Channel Guardrail Post
U-channel post in 178 x 76 x 6 mm with four pre-punched holes, 610 g/m2 galvanised. Driven into verge or bolted down on deck and parapet.
Round Guardrail Post
Round guardrail post in O114 x 4.5 mm or O140 x 4.5 mm, supplied with a dome cap. Hot-dip galvanised, for runs where a round section is specified.
Sigma Guardrail Post
Sigma-section post for high-containment runs needing a stiffer section than C or U. Punched to the blockout in use, galvanised to 600-1100 g/m2.
Square Guardrail Post
Square-section guardrail post for site barriers, car parks and access control. Pre-punched, galvanised, with a cap to keep water out of the hollow section.
H-Section Guardrail Post
H-section post in W6 x 9 or W6 x 8.5 for AASHTO-specified runs in the Americas. Punched to the M180 pattern, hot-dip galvanised.
Z-Section Guardrail Post
Z-section post for median barrier where rail is mounted on both faces. Pre-punched on both flanges, galvanised, 1.5-2.2 m lengths.Specification parameters
1. Product Range
| Round Post | Steel tube; standard post for two-wave (W-beam) runs in Chinese practice |
|---|---|
| Square Post | Square hollow section; 130 × 130 mm used with three-wave (thrie-beam) runs |
| Sigma Post | Open sigma profile; post section used in German RAL-RG 620 systems |
| C / U-Channel Post | Cold-formed channel; punched at one end, driven or base-plated |
| Z-Section Post | Cold-formed Z profile for roadside runs |
| H-Section (Wide-Flange) Post (US) | W6 × 9 or W6 × 8.5 for US strong-post W-beam systems |
2. Sections & Lengths
| Thickness range offered | 3 – 8 mm; customized |
|---|---|
| Round post mass (4.5 mm wall) | Ø114: approx. 12.16 kg/m; Ø140: approx. 15.06 kg/m |
| Holes | Punched for spacer / blockout and rail bolts to the system drawing; US W6 × 9 post: 19 mm (3/4 in) holes for 16 mm (5/8 in) post bolt |
3. Post Spacing & Mounting
| China (JTG designations) | 4 m or 2 m spacing; 1 m with embedded sleeves — e.g. Gr-A-4E = roadside A-class, 4 m spacing, driven |
|---|---|
| Germany (RAL-RG 620) | 2.0 m spacing; 1.9 m sigma post driven 1.20 m deep |
| USA | 1905 mm (6 ft 3 in) standard; 953 mm (3 ft 1-1/2 in) and 476 mm (1 ft 6-3/4 in) reduced spacing |
| US embedment | 1016 mm (40 in) for a 1829 mm (6 ft) post at 787 mm (31 in) rail height |
| Mounting methods | Driven; concrete foundation; embedded sleeve; base plate bolted to concrete deck or pavement |
| Soil guidance | Soft soil: driven posts without flange plate; concrete surfaces: base-plated posts |
4. Material
| Chinese GB | Q235B (GB/T 700); Q345 |
|---|---|
| Grade Equivalents | Q235B ≈ S235JR (EN 10025) ≈ ASTM A283M Gr. D; Q345 ≈ S355JR ≈ ASTM A529M |
| Fabrication | Posts cut to length before hot-dip galvanizing |
5. Surface Treatment
| Surface Treatment | Hot-dip galvanizing; galvanizing + powder / plastic coating |
|---|---|
| Zinc Coating Offered | 275 / 550 / 610 / 1100 / 1200 g/m² (approx. 40 / 80 / 85 / 160 / 170 µm); customized |
| JT/T 281-2007 | Posts and spacers: ≥ 350 g/m² average zinc mass |
| GB/T 31439.1 project specifications | Posts: 600 g/m² zinc |
| Duplex (zinc + coating) | 275 g/m² average zinc + ≥ 250 µm dip coating or ≥ 76 µm polyester coating |
6. Standards
| China | JT/T 281-2007 (round posts, two-wave guardrail); JT/T 457-2007 (square posts, three-wave guardrail); GB/T 31439.1 / 31439.2 |
|---|---|
| China — design | JTG D81-2017 / JTG/T D81-2017 (post spacing and mounting by guardrail designation) |
| Germany | RAL-RG 620 |
| USA | AASHTO M180 (steel guardrail components incl. posts); AASHTO-ARTBA-AGC Task Force 13 hardware guide, wide-flange guardrail post |