Get Free Quote

C-Section Guardrail Post

Also known as: post guardrail, steel guardrail posts

C-section guardrail post in 150 x 75 x 4.5 mm, pre-punched for the blockout and rail. 1.5-2.2 m lengths, hot-dip galvanised, driven or base-plated.

Choose this when
The default post for W-beam runs on verge or median, driven into the ground with a standard blockout.
Choose another when
Where the project specifies a round, H-section or sigma post, or the deck cannot take a driven post.
Guardrail Posts & Stanchions
Profile
C-section (lipped channel)
Section size
150 x 75 x 4.5 mm; 100 x 50 / 120 x 55 mm options
  • SampleSample available on request, freight at cost
  • PaymentT/T, L/C at sight — terms confirmed on the quotation
  • ShippingFOB / CIF from Qingdao or Tianjin
  • Lead time5–20 days after drawing approval

Where it is used

W-beam runs on verge and median.

Specification parameters

Section & length

ProfileC-section (lipped channel)
Section size150 x 75 x 4.5 mm; 100 x 50 / 120 x 55 mm options
Length1.5 - 2.2 m; customised
Massapprox. 10-12 kg/m (calculated, 150 x 75 x 4.5)

Punching & mounting

HolesPre-punched for blockout and rail bolts, to drawing
Post spacing2 m / 4 m
MountingDriven, or flanged base plate

Material & coating

Steel gradeQ235B (S235JR) or Q355B (S355JR)
Zinc coating550 / 600 g/m2
FinishHot-dip galvanised after punching