
W-Beam Guardrail System with Posts
Also known as: guard rails on highway, road guard rail, crash barriers for sale, highway railing
Complete W-beam run: rail, posts, blockouts, splice and post bolts. Supplied as one system so a site is not left short of fasteners. 2.0-4.0 m sections.
- Choose this when
- A new build where rail, posts, blockouts and the bolt kit are all wanted in one delivery against one drawing.
- Choose another when
- A repair or an extension where the posts are already in the ground and only the rail needs replacing.
- Profile
- Two-wave W-beam
- Rail size (L x W x H)
- 4320 x 310 x 85 mm (4000 mm effective); adjusting rails 2820-3820 mm
- SampleSample available on request, freight at cost
- PaymentT/T, L/C at sight — terms confirmed on the quotation
- ShippingFOB / CIF from Qingdao or Tianjin
- Lead time5–20 days after drawing approval
Where it is used
Complete run supply for a new build.
Specification parameters
Beam dimensions
| Profile | Two-wave W-beam |
|---|---|
| Rail size (L x W x H) | 4320 x 310 x 85 mm (4000 mm effective); adjusting rails 2820-3820 mm |
| Thickness | 3.0 / 4.0 mm |
| Splice | 8 x M16 bolts per joint |
System components
| Post | Round 114 x 4.5 mm, 1950 / 2150 mm long; C-section 150 x 75 x 4.5 mm option |
|---|---|
| Post spacing | 4 m standard; 2 m on high-risk sections |
| Quantities per km | approx. 250 rails + 251 posts + blockouts at 4 m spacing |
| Ends | Flared, buried or round (fish-tail) end terminals |
Material & coating
| Steel grade | Q235B (S235JR); Q355B on request |
|---|---|
| Zinc coating | Rail 600 g/m2; posts and blockouts 350 g/m2 minimum average |
| Fasteners | Hot-dip galvanised bolts, nuts and washers |