
Traffic Light Pole
Also known as: traffic pole light
Cantilever traffic light pole for signalised junctions: galvanised steel pole with single or double mast arm for signal heads, countdown timers and signs.
- Choose this when
- Signalised intersections where signal heads, countdown timers and signs have to hang over the carriageway from one column.
- Choose another when
- Road lighting only, where a street lighting column with a luminaire arm is the right product.
- Height
- 6 - 7 m typical; up to approx. 9 m with luminaire or sign arm
- Shape
- Round tapered, octagonal or 12-sided, single-section upright
- SampleSample available on request, freight at cost
- PaymentT/T, L/C at sight — terms confirmed on the quotation
- ShippingFOB / CIF from Qingdao or Tianjin
- Lead time5–20 days after drawing approval
Where it is used
Signalised intersections on urban roads and highway junctions.
Specification parameters
Pole & mast arm
| Height | 6 - 7 m typical; up to approx. 9 m with luminaire or sign arm |
|---|---|
| Shape | Round tapered, octagonal or 12-sided, single-section upright |
| Top / bottom diameter | approx. 160 - 300 / 240 - 380 mm, by arm length |
| Wall thickness | approx. 4.5 - 8.0 mm (pole); 4.5 - 6.0 mm (arm) |
| Arm | Single or double mast arm, approx. 3 - 15 m; tapered approx. 165 - 280 mm at root to 90 - 120 mm at tip |
| Signal mounting height | 5.5 - 7 m from road surface to underside of signal head |
| Mounting provisions | Bracket clamps for 1 - 3 signal heads per arm; street-name sign, luminaire arm and camera bracket as options |
Base & loading
| Base plate | approx. 450 - 600 mm square or round, 16 - 20 mm thick, slotted holes |
|---|---|
| Anchor bolts | 4 - 6 x M20 - M24, 1.0 - 1.6 m long; up to approx. 44 mm dia. for 14 m arms |
| Design wind speed | approx. 36 m/s (80 mph) to 44 m/s (160 km/h), or to site data |
| Supply boundary | Pole, mast arm(s), base plate and anchor bolts; signal heads separate |
Material & finish
| Material | Q235B / Q355B, S355JR, A36 / A572 Gr 50 |
|---|---|
| Finish | Hot-dip galvanised after fabrication, 85 - 100 um; optional polyester powder coat in RAL colours |